330031 Range Surface Burner Receptacle

The 330031 Range Surface Burner Receptacle is designed for universal installation and can be used on most brands including, Maytag, Jenn-Air, Magic Chef, Hardwick, Admiral, Whirlpool, Frigidaire and Kenmore electric ranges and cook tops

Are you experiencing excessive range surface terminal block failure? Are you using stainless steel cookware? If so consider upgrading to the 12001676 Heavy Duty Range Surface Burner Receptacle FYI, stainless steel cookware is a very poor conductor of heat and causes an excessive amount of heat to be reflected downward toward the receptacle and cook top.

Included terminal block, two different brackets, ceramic wire nuts, heat shrink tubing, and wire

Installation instructions for the 330031 Range Surface Burner Receptacle

Disconnect the range or cook top from the electrical supply!

1. Remove screws retaining old receptacle to top unit

2. Remove inoperative receptacle block, by cutting the two harness wires approximately 4 inches from the end of the receptacle block

3. Install new receptacle block and mounting clip

4. Strip 3/8th of the insulation from the range wires and attach the new lead wires using the ceramic wire nuts included in the kit

5. Attach the new receptacle to the range and test the operation

Replaces, 0089336, Y0089336, ERR117, RR110 and 868464